Clicq-Pression™ Transfer Abutment | Starter Kit fitting with Spiral Tech® Conical Conn. RP
Starting at $1,495.00
In stock
SKU
111070-100-433
Clicq-Pression™ Transfer Abutment | Starter Kit fitting with Spiral Tech® Conical Conn. RP is available to buy in increments of 1
![Loading...](https://edisonmed.com/static/version1711117425/frontend/Dibay/base/en_US/images/loader-1.gif)
Clicq-Pression™ Transfer Abutment | Starter Kit fitting with Spiral Tech® *
- Fits with: Spiral Tech® - Conical Conn. RP *
- Platforms: RP
- Material: Titanium (Ti-6AL-4V-ELI)
- Recommended Torque Tightening: 20 NCM for Temporary | 30 NCM for Permanent
- Required Screwdriver: 0.5" | 1.25mm Hex / UniGrip
What's included?
- Straight Clicq™-Pression Abutment | Short cone 1.5 mm Height - 3 pcs
- Straight Clicq™-Pression Abutments | Short cone 3 mm Height - 3 pcs
- Straight Clicq™-Pression Abutments | Short cone 4.5 mm Height - 3 pcs
- -----------------
- Straight Clicq™-Pression Abutment | Medium cone 1.5 mm Height - 3 pcs
- Straight Clicq™-Pression Abutments | Medium cone 3 mm Height - 3 pcs
- Straight Clicq™-Pression Abutments | Medium cone 4.5 mm Height - 3 pcs
- -----------------
- Straight Clicq™-Pression Abutment | Long cone 1.5 mm Height - 3 pcs
- Straight Clicq™-Pression Abutments | Long cone 3 mm Height - 3 pcs
- Straight Clicq™-Pression Abutments | Long cone 4.5 mm Height - 3 pcs
- -----------------
- 15° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs
- 15° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
- -----------------
- 25° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs
- 25° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
- -----------------
- TAP-AN-S | Short Abutment Analog for Clicq™-Pression Abutment - 3 pcs
- TAP-AN-M | Medium Abutment Analog for Clicq™-Pression Abutment - 3 pcs
- TAP-AN-L | Long Abutment Analog for Clicq™-Pression Abutment - 3 pcs
- -----------------
- TAP-PT | Snap-on plastic transfer - 15 pcs
- -----------------
- TAP-HA-S | Short Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
- TAP-HA-M | Medium Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
- TAP-HA-L | Long Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
- -----------------
- HSDA-SV-L | Long manual screwdrive 1.25 mm hex - 1 pcs
Main Advantages
- Enables taking a more accurate impression
- Enables taking a full arch / mouth impression
- Could be used as a final abutment
- Titanium Nitride (TiN) coating finish
- Cost Effective – can be reused several times
- Time efficient
Related Products
- Snap-On plastic transfer is included
- Peek healing cap can be purchased separately
- Abutment Lab Analog can be purchased separately
- Castable waxing sleeves can be purchased separately
Connection | Spiral Tech® - Conical Conn. RP |
---|
Write Your Own Review