Clicq-Pression™ Transfer Abutment | Starter Kit fitting with Surgikor Implant® Conical Conn. Regular RC

Clicq-Pression™ Transfer Abutment | Starter Kit fitting with Surgikor Implant® *

• Fits with: Surgikor Implant® - Conical Conn. Regular RC *
• Platforms: RC
• Material: Titanium (Ti-6AL-4V-ELI)
• Recommended Torque Tightening: 20 NCM for Temporary | 30 NCM for Permanent
• Required Screwdriver: 0.5" | 1.25mm Hex / UniGrip

What's included?

• Straight Clicq™-Pression Abutment | Short cone 1.5 mm Height - 3 pcs
• Straight Clicq™-Pression Abutments | Short cone 3 mm Height - 3 pcs
• Straight Clicq™-Pression Abutments | Short cone 4.5 mm Height - 3 pcs
• -----------------
• Straight Clicq™-Pression Abutment | Medium cone 1.5 mm Height - 3 pcs
• Straight Clicq™-Pression Abutments | Medium cone 3 mm Height - 3 pcs
• Straight Clicq™-Pression Abutments | Medium cone 4.5 mm Height - 3 pcs
• -----------------
• Straight Clicq™-Pression Abutment | Long cone 1.5 mm Height - 3 pcs
• Straight Clicq™-Pression Abutments | Long cone 3 mm Height - 3 pcs
• Straight Clicq™-Pression Abutments | Long cone 4.5 mm Height - 3 pcs
• -----------------
• 15° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs
• 15° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
• -----------------
• 25° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs
• 25° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
• -----------------
• TAP-AN-S | Short Abutment Analog for Clicq™-Pression Abutment - 3 pcs
• TAP-AN-M | Medium Abutment Analog for Clicq™-Pression Abutment - 3 pcs
• TAP-AN-L | Long Abutment Analog for Clicq™-Pression Abutment - 3 pcs
• -----------------
• TAP-PT | Snap-on plastic transfer - 15 pcs
• -----------------
• TAP-HA-S | Short Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
• TAP-HA-M | Medium Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
• TAP-HA-L | Long Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
• -----------------
• HSDA-SV-L | Long manual screwdrive 1.25 mm hex - 1 pcs

Main Advantages

• Enables taking a more accurate impression
• Enables taking a full arch / mouth impression
• Could be used as a final abutment
• Titanium Nitride (TiN) coating finish
• Cost Effective – can be reused several times
• Time efficient

Related Products

• Snap-On plastic transfer is included
• Peek healing cap can be purchased separately
• Abutment Lab Analog can be purchased separately
• Castable waxing sleeves can be purchased separately